      |
 |
 |
|
        |
|
 |
|
| Estimated Mechanical Properties and Machinability | |||||||
| Ratings of Resulfurized Carbon Steel Barsa | |||||||
| Estimated Minimum Values | |||||||
| AISI & SAE No. | Type of Processing (psi) | Tensile Strength (psi) | Yield Strength (psi) | Elongation in 2 inches, (%) | Reduction in Area, (%) | Brinell Hardness | Average Machinability Rating (Cold Drawn 1212 = 100%) |
| 1111 | hot rolled | 55,000 | 33,000 | 25 | 45 | 121 | — |
| cold drawn | 75,000 | 58,000 | 10 | 35 | 163 | 95 | |
| 1112 | hot rolled | 56,000 | 33,500 | 25 | 45 | 121 | — |
| cold drawn | 78,000 | 60,000 | 10 | 35 | 167 | 100 | |
| 1113 | hot rolled | 56,000 | 33,500 | 25 | 45 | 121 | — |
| cold drawn | 78,000 | 60,000 | 10 | 35 | 167 | 135 | |
| 12L14 | hot rolled | 57,000 | 34,000 | 22 | 45 | 121 | — |
| cold drawn | 78,000 | 60,000 | 10 | 35 | 163 | 160 | |
| 1108 | hot rolled | 50,000 | 27,500 | 30 | 50 | 101 | — |
| cold drawn | 56,000 | 47,000 | 20 | 40 | 121 | 80 | |
| 1109 | hot rolled | 50,000 | 27,500 | 30 | 50 | 101 | — |
| cold drawn | 56,000 | 47,000 | 20 | 40 | 121 | 80 | |
| 1117 | hot rolled | 62,000 | 34,000 | 23 | 47 | 121 | — |
| cold drawn | 69,000 | 58,000 | 15 | 40 | 137 | 90 | |
| 1118 | hot rolled | 65,000 | 36,000 | 23 | 47 | 131 | — |
| cold drawn | 72,000 | 61,000 | 15 | 40 | 143 | 85 | |
| 1119 | hot rolled | 62,000 | 34,000 | 23 | 47 | 121 | — |
| cold drawn | 69,000 | 58,000 | 15 | 40 | 137 | 100 | |
| 1132 | hot rolled | 83,000 | 45,500 | 16 | 40 | 167 | — |
| cold drawn | 92,000 | 77,000 | 12 | 35 | 183 | 75 | |
| 1137 | hot rolled | 88,000 | 48,000 | 15 | 35 | 179 | — |
| cold drawn | 98,000 | 82,000 | 10 | 30 | 197 | 70 | |
| 1140 | hot rolled | 79,000 | 43,500 | 16 | 40 | 156 | — |
| cold drawn | 88,000 | 74,000 | 12 | 35 | 170 | 70 | |
| 1141 | hot rolled | 94,000 | 51,500 | 15 | 35 | 187 | — |
| cold drawn | 105,100 | 88,000 | 10 | 30 | 212 | 70 | |
| 1144 | hot rolled | 97,000 | 53,000 | 15 | 35 | 197 | — |
| cold drawn | 108,000 | 90,000 | 10 | 30 | 217 | 80 | |
| 1145 | hot rolled | 85,000 | 47,000 | 15 | 40 | 170 | — |
| cold drawn | 94,000 | 80,000 | 12 | 35 | 187 | 65 | |
| 1146 | hot rolled | 85,000 | 47,000 | 15 | 40 | 170 | — |
| cold drawn | 94,000 | 80,000 | 12 | 35 | 187 | 70 | |
| 1151 | hot rolled | 92,000 | 50,500 | 15 | 35 | 187 | — |
| cold drawn | 102,000 | 86,000 | 10 | 30 | 207 | 65 | |
| a | All SAE 1100 series steels are rated on the basis of .10 max silicon or coarse grain melting practice. |
